Redmi has announced a new smartphone, Redmi K30i 5G. Not only does this phone offer 5G connectivity for less than $300, it also comes with a 120Hz refresh rate display. However, this is not all, this phone also includes a very powerful processor, and so on. Speaking of its specifications in a moment, let's take a look at its design first. As you can see, Redmi K30i brings an extremely thin bezel. However, it does have a display camera hole in the upper right corner. It was a pill-shaped hole, but it was actually very small. It does have two cameras.
Redmi K30i 5G |
The power/lock button is located on the right side of this phone and it doubles as a fingerprint scanner. The volume up and down buttons are located directly above the fingerprint scanner.
By the way, this phone includes a flat panel display. There are four vertically aligned cameras on the back of this phone. Directly below these cameras, you will notice a dual LED flash, and the Redmi logo is also placed there.
The device is equipped with a 6.67-inch Full HD+ (2400 x 1080) IPS LCD display with a refresh rate of 120Hz. The display does support HDR10 content and is protected by Gorilla Glass 5.
The phone is powered by a Snapdragon 765G 64-bit octa-core processor. This is one of Qualcomm's best mid-range processors, and this phone does support 5G connectivity.
Android 10 is pre-installed on Redmi K30i 5G and MIUI 11. The device is equipped with 6GB of memory and 128GB of non-expandable internal storage. A 4,500mAh battery is also included in this package. The phone does support fast charging, to be precise, 30W fast wired charging. Wireless charging is not supported here.
Redmi chose to include a 3.5 mm headphone jack on this phone. The main camera on the back of the device uses a 48-megapixel sensor (f/1.9 aperture, 0.8um pixel size, PDAF). It also includes an 8-megapixel ultra-wide-angle camera (1.12 micron pixel size, 120 degree FoV), and a 2-megapixel macro camera (f/2.4 aperture). A 2 megapixel depth camera (f/2.4 aperture) can also be found there.